Please note that these calculations are based on U.S. measurements and roofing practices, and may not be sufficient or applicable for use outside of North America.

OlyBond500 Bag-in-Box

Total Squares Applied
Estimated Coverage Rate/BIB Set
(i.e. Squares/10 Gallon Set)
Total Sets Required
 
BIB Price Per 10-Gal. Set$
Total BiB Cost
 
Estimated BiB Cost/Square
 

OlyBond500 SpotShot Cartridges

Total Squares Applied
Estimated Coverage Rate/SS Case
(i.e. Squares/Case)
Total Cases Required
 
SpotShot Price/Case $
Total SpotShot Cost
 
Estimated SS Cost / Square
 

Considerations that affect total squares and application rates:

Number of layers
Deck/Substrate type
Deck/substrate roughness
Bead spacing (6 - 12 inches)
Typical Application Rates*
(Bag-in-Box Dispensed from PC2)
Typical Coverage (Squares/Gallon)
Insulation to Concrete1.7 to 2.0
Insulation to Insulation1.7 to 2.1
Insulation to Smooth BUR1.5 to 1.7
Insulation to Modified Bitumen1.5 to 1.8
Insulation to Gypsum1.0 to 1.2
Insulation to Lightweight Concrete**1.0 to 1.7
Insulation to Wood1.7 to 2.0
Insulation to Cementitious Wood Fiber1.0 to 1.2
Insulation to Steel1.0 to 1.2

*Application rates can vary significantly based on the surface roughness and absorption rate of the substrate. Typical coverage rates for OlyBond500 dispensing through the PaceCart 2 are 10-20 squares per 10 gallon Bag-in-Box sets. Typical coverage rates for OlyBond500 SpotShot dispensed through applicators is 4-6 squares per case (i.e. 4, 1,500 ml cartridges). The rates shown are estimates only and not a guarantee of actual performance.

**Coverage rates may vary substantially based on the absorption rate and/or the surface conditions of the LWC.

Superior productivity. Superior performance.