PaceCart 3

Click thumbnails to see additional images.

New Patented Applicator for Dispensing OMG OlyBond500® Adhesive

The OMG PaceCart 3TM is highly durable and designed with roofing contractors in mind! It’s easy to operate, maintain and store and capable of dispensing enough OlyBond500 to apply up to 60 squares (557m2) of insulation per hour! The 30 ft. (9m) hose allows for maximum reach and maneuverability on the roof. PaceCart 3 provides the lowest installed cost method for applying OlyBond500.

PATENT NOTICE: The OMG PaceCart 3™ dispensing cart and the Bag-in-Box OlyBond500® Part 1/Part 2 adhesive system, including the adhesive dispensing method, are covered by one or more of U.S. Patent Nos. 6,220,526; 8,113,385; 8,132,693; 8,167,170; 8,342,372 and 8,474,658; and  Canadian Patent No. 2,591,502. U.S. and Canadian Patents Pending.

Features & Benefits

  • Gun Assembly is ergonomically designed for applying two part adhesives.
  • Grease free, simplifying start up and shut down procedures for rooftop time savings.
  • Robust Pumps designed for use with high viscosity liquids.
  • Color coded trays minimize the chance cross contaminating Part 1 and Part 2 dispensing lines.
  • An easy-to-read volt meter lets contractors know if the incoming power is insufficient to operate the PaceCart3.
  • Each Pace Cart 3 is generator ready with a built in shelf designed to hold a portable generator (sold separately). On larger production projects this provides contractors with improved and cord-free mobility eliminating a potential trip hazard.
  • Patented dispensing system and  Bag-in-Box technology are designed to work together to maximize production.
  • Fastest low pressure application method on the market provides the lowest installed cost method in the industry.
  • Includes 30 ft. (9m) hose for maximum reach and maneuverability on the roof.
  • Minimal maintenance requirements. Easy to operate and maintain.


For 15 Gallon PaceCart Conversion Kit information, click here.

For PaceCart 2 information, click here.

Ordering Info
Downloads & Videos


OlyBond500 is dispensed through the patented PaceCart 3TM  in 12 in. on center bands. OlyBond500 rises 3/4 in. to 1 in. above the substrate and then the board stock is placed into the adhesive and walked into place.The chemical cure takes place in approximately 10-15 minutes after dispensing, depending on temperature and weather conditions. OlyBond500 is FM and Miami-Dade County Approved.

Ordering Information

 SKUProduct DescriptionPackagingWeight (lbs.)
Applicators OB500PCART3 PaceCart 3 Each 150
OB500MIXTIP-20L Static Mix Tips for PaceCarts 20 Each 2
OBPC-VEEGUN Manifold and Gun Assembly Each 5
OB500LTS-1GAL PCPreserver Long Term Storage Product for PaceCart 1 Each 7


 SKUProduct DescriptionPackagingWeight (lbs.)
Adhesives OB5001-BAG OlyBond500 Part 1 5 Gal. Bag-in-Box 53
OB5002-RBAG OlyBond500 Part 2 5 Gal. Bag-in-Box 45
OB500GREEN1-BAG OlyBond500 Green Part 1 5 Gal. Bag-in-Box 55
OB500GREEN2-RBAG OlyBond500 Green Part 2 5 Gal. Bag-in-Box 45

Go back

Product 4 of 11

Superior productivity. Superior performance.