Logo for: OMG Roofing Products

Concrete Fasteners

A hammer-in, non-threaded fastener with a split bulb design that exerts pressure on hole walls for superior strength and hold power.

The OMG CD-10 is available in lengths between 2-in and 12-in.

Find an OMG Rep / DistributorRequest a Service

Features & Benefits

  • Diamond points allow easier installation and less chance of hole damage.
  • CD-10 are the strongest hammer-in fasteners available with typical pullout values in cured concrete (3000 psi) are over 800 lbs.

Product Use

Pre-drill a hole using a carbide drill bit (7/32-in. for CD-10). Install fasteners with a 2 lb. short handle sledge hammer. Minimum fastener embedment into the deck should be 1-in. The pre-drilled hole must be a minimum of 1/2-in. deeper than fastener embedment.

Prior to job start, contact OMG to perform a pull out test to determine deck suitability and pullout values.

Note: Care must be taken not to overdrive the fastener causing subsequent damage to the insulation facer.

Technical Data

Head Diameter:.435-in. (11-mm.)
Head Style:Flat Top Pan
Coating:OMG CR-10 corrosion resistant coating passes the corrosion requirements of FM Approval Standard 4470 and EAD 030351-00-0402.

Approvals

Packaging Info

CD-10

Cat. No.Fastener Length (in)Packaging QtyWeight (lbs)
CD002250013
CD003350018
CD004450023
CD005550028
CD006650033
CD007750038
CD008850044
CD009925025
CD0101025028
CD0111125031
CD0121225033