Termination Bars
The OMG Termination Bar is designed to terminate single-ply membrane at parapet walls and penetrations. Termination Bar is made of extruded aluminum (6063 T6 alloy) with a mill finish, or Series #304 stainless steel alloy.
Features & Benefits
- Pre-punched for enhanced speed of installation.
- Available in four configurations to accommodate most applications (Channel bar, Lip bar and Heavy Flat bar*) (*Also available in stainless steel)
- Can be ordered with special hole spacing to meet your application needs.
Product Use
Oval holes that measure 1/4-in. x 3/8-in. (6 x 10 mm) are punched into each bar, with standard 6, 8 or 12-in. (150, 200 or 300 mm) on center spacing.
Termination Bar can be made to order with special hole spacing. Stainless steel bar (Heavy Flat only) is punched at 6-in. (150 mm) on center only.
All OMG termination bar comes in 10-ft. (3.05 m) lengths. Aluminum bar is packaged in tubes of 50 pieces (500-ft. / 152.5 m) total. Stainless steel bar is packaged in tubes of 20 pieces (200-ft. / 61 m) total. There are 10 tubes per pallet.
Use the OMG Heavy Duty Fastener or Masonry Anchor to secure the termination bar.
Packaging Information
Channel Bar
| Cat. No. | Width (in) | Thickness (in) | On-Center (OC) Spacing (in) | Weight (lbs) |
|---|---|---|---|---|
| CHANB06 | 1 | 0.10 | 6 | 76 |
| CHANB08 | 1 | 0.10 | 8 | 76 |
| CHANB12 | 1 | 0.10 | 12 | 76 |
| Leg/Lip: 1/4-in. high top & bottom leg, 90˚ angle |
Lip Bar
| Cat. No. | Width (in) | Thickness (in) | On-Center (OC) Spacing (in) | Weight (lbs) |
|---|---|---|---|---|
| LIPTB06 | 3/4 | 0.09 | 6 | 57 |
| LIPTB08 | 3/4 | 0.09 | 8 | 57 |
| LIPTB12 | 3/4 | 0.09 | 12 | 57 |
| Leg/Lip: 3/16-in. wide lip, 90˚ angle |
Flat Bar
| Cat. No. | Width (in) | Thickness (in) | On-Center (OC) Spacing (in) | Weight (lbs) |
|---|---|---|---|---|
| FLATB06 | 1 | 0.09 | 6 | 57 |
| FLATB08 | 1 | 0.09 | 8 | 57 |
| FLATB12 | 1 | 0.09 | 12 | 57 |
Heavy Flat Bar (Aluminum)
| Cat. No. | Width (in) | Thickness (in) | On-Center (OC) Spacing (in) | Weight (lbs) |
|---|---|---|---|---|
| FLATB06-18 | 1 | 0.125 | 6 | 80 |
| FLATB08-18 | 1 | 0.125 | 8 | 80 |
| FLATB12-18 | 1 | 0.125 | 12 | 80 |
Heavy Flat Bar (Stainless Steel)
| Cat. No. | Width (in) | Thickness (in) | On-Center (OC) Spacing (in) | Weight (lbs) |
|---|---|---|---|---|
| FLATB06SS | 1 | 0.125 | 6 | 86 |
